Waxing tools

A large nylon brush combined with natural cork

Pure Small Nylon Brush

Used for klister application or to remove wax or klister from the base before cleaning with Base Cleaner.

Medium coarse bronze brush. Ø 0.18 mm. Preferred by some as first brush on wax. 10 strokes.

Universal scraper with synthetic cork and bottle opener. Practical when touring.

Great economy iron which is competitive with farmore expensive models. Redesigned from scratch with an ergonomic body and a wide metal plate that suits both alpine, snowboard and nordic. Angled at one side to make it easier to keep a constant speed when melting the wax. The thick metal plate ensures a stable heating. Plate dimension 100x160 mm.

Blue nylon brush. Ø 0.12 mm. A fine soft nylon brush for polishing all waxes. 5 to 10 strokes.

Rectangular medium bronze brush. Good as a first brush used after scraping. 0.15mm bristle diameter.

High quality natural cork. Has felt side for application of Cera F.

Every mountain cabin in Norway has a Swix Outdoor Thermometer hung by the front door! It’s nostalgic. Know exactly which wax to use for your early morning ski. This SWIX thermometer will show you which klister and Hardwax wax to use in order to have the perfect day on the trails. Ø 30 cm.

Sharpener for plexi scrapers with short, sharp file, 40 mm. Can be mounted on the wall or waxing table. It's important to have sharp scrapers when prepping.

T0179B BRUSH RECTANGULAR, STEEL Steel brush. Ø 0.18 mm. Used as first brush on wax after scraping. 5-6 strokes. High quality steel brushe that has had an excellent reception in racing.

This is the second brush for use with hydrocarbon or fluorinated wax, or the first brush for use with Swix Cera F waxes: 10-20 strokes recommended for best results Rectangular Hand Brushes are great for travel and as an economical way to build a selection of ski tuning brushes

Synthetic cork for kick wax.

T73D220 T73 DIGITAL IRON, 220V 220 Volt, 1000 Watt. A economy digital iron with an 18 mm thick plate for a great heat distribution, and with a digital microprocessor that ensures a very precise temperature control. The digital display is controlled by the adjustment wheel. Operating temperatures are 80°C to 170°C.

220 Volt, 500 Watt. The 8 mm thick plate gives a stable temperature. T73 has manual choice of temperature by indication of degrees and is simply done by an adjustmentwheel. Adjustment range from 100°C to 165°C.

Fine steel brush. Ø 0.06 mm. Ultra fine bristles. Goes deep into the base structure. Cleans and refreshes the base. Often used as second brush on wax. 4 to 5 strokes.

The bases of wooden skis need to be treated with pine tar, to repel the moisture and to seal the wooden base. Use a torch or heat gun to heat it into the base.

Practical groove scraper for wax removal.

T823D PLEXI SCRAPER 3MM Sharp and effective plexi scraper for scraping off glider, 3 mm.

T824D PLEXI SCRAPER 4MM Sharp and effective plexi scraper for scraping off glider, 4 mm.

T825D PLEXI SCRAPER 5MM Sharp and effective plexi scraper for scraping off glider, 5 mm.

World Cup sharpening tool for plexi scrapers with 100 mm high quality file. Two walls for stable position makes it easy to sharpen precise.