Vauhti Blackfox High Fluor Powder -2...-20

A powder for dry and severe cold conditions

BlackFox performs well in severe cold even with low humidity . The operating range is wider when the snow is dirty. Use either an SF or HF series Blue or Green glider as a basewax for the GoldFox powder.

Application:

Cold: Sprinkle the powder on the glide surfaces. Rub the powder either with a manual hand cork or a rotocork until it forms an even, smooth layer on the glide surfaces. With a rotocork apply only light pressure. Let the powder cool and then finish with a brush matched to the conditions. If needed, the application can be repeated by corking the powder dust generated by the brushing over again. Always complete the application with a thorough brushing.

Hot: Sprinkle the powder and rub lightly using a natural cork ensuring an even spread throughout the glide surfaces. A light rubbing of the powder prior to ironing is a requirement for a successful application. Without the initial rubbing, the graphite contained in the powder will not sufficiently spread into an even layer resulting in reduced overall performance. Use a mild iron setting, approximately 110°C as the powder does not need to fully melt. Cool the bases thoroughly and brush vigorously to finish.