Fenders

- Made of Polypropylene with dual material spoiler - Seat post adjustable clamp - Fit seat post Ø 25 – 32 mm - 47 to 60 mm blade width - Reflective strip - Weight: 125g

Topeak's DeFender M2 rear fender offers durable rain and mud protection on wet and sloppy rides. It's incredibly light and easy-to-use, too. The quick-release attachment fits most seatposts and allows the DeFender to be installed and removed in seconds. Plus, the 2-pivot arm is super adjustable for better coverage and a perfect fit on any bike.

Protect your precious road rocket from wet roads and bad weather with Topeak's DeFender RC11 fender. It uses unique quick-release mounting system that makes installation a snap and it's made from tough, yet light polycarbonate with stainless steel struts for stiffness and durability. There are pivot points that make it compatible with nearly any size bike or tire. The underside is highly polished so grime doesn't stick and, it accommodates tires up to 700 x 25c in size.

Topeak's DeFender XC11 for 27.5-inch wheel bikes is a rear fender that offers durable rain and mud protection on wet and sloppy rides. The quick-release seatpost attachment allows the DeFender to be installed and removed in seconds and the angle is adjustable for the perfect fit. It's incredibly light, too.

Topeak's DeFender XC11 for 29ers is a rear fender that offers durable rain and mud protection on wet and sloppy rides. It's incredibly light and easy-to-use, too. The quick-release seatpost attachment allows the DeFender to be installed and removed in seconds and the angle is adjustable for the perfect fit.

Stay clean and stay seen with Topeak's DeFender iGlow. It's a unique rear fender that has an integrated 0.5W light for safety at night or during low-visibility conditions. Strap this impact-resistant plastic fender down quickly and easily to the junction of your bike's seat and top tubes, and adjust it for perfect coverage. With constant and blinking modes, this light is ready when you are.

Keep the road grime and water off your clothes with a durable fender set made specifically for the Roll. No-fuss installation means you can add them quickly and easily, so you're always ready to ride. - Valuable and durable plastic fender set for Roll. - Designed for 650b x 2.3" tires. - Stainless steel fender stays and hardware. - Rear fender supports Plug and Play frame mounting. - Front: 660mm / Rear: 1050mm

The ultimate clip-on mudguard set for road and cyclocross bikes for tire widths between 25 and 32mm. Its smart, double-hinged quick release fitting system also fits aero forks and is also compatible with disc brakes, direct mount brakes, and thru axles. Mudguards can be perfectly adapted to the radius of the wheel by adjusting the length of the stays. Its superlight extra long mud flaps give additional spray protection. In addition to using the quick release rubber straps it can also be fixed in place with zip ties. Includes adhesive protection kit to avoid damaging the paintwork. Disc brake compatible: Please be mindful of the brake wire.

A sturdy, secure set of full-coverage fenders designed to fit more bikes than any fenders in their class. Easy to install and easy to adjust, Roadrunners are a favorite of both cyclists and shop mechanics. Weight: 752 g / 1.66 lbs (pair) Construction - Forged alloy RAINRUNNER Q/R mounts - 3M Reflex rear reflectivity - Virtually unbreakable Techniflex body - Stainless steel stays - Safety front stays Mounting System - Below: Mount to Quick-Release skewers via included AXLE-RUNNERS - Above: Mount to brake bridge and fork crown via included nut and bolt or with zip ties Added Benefit - Included proprietary AXLE-RUNNERS mount to almost any front or rear Q/R skewer to “create” eyelets - 3M Reflex rear logo enhances visibility - Support stays spaced for maximum stiffness and frame compatibility - Front fenders equipped with safety stays to protect against objects becoming lodged in wheel - Sold pre-assembled for quick mounting

A sturdy, secure set of full-coverage fenders designed to fit more bikes than any fenders in their class. Easy to install and easy to adjust, Roadrunners are a favorite of both cyclists and shop mechanics. Note: The Roadrunner AR - Road fender fits 700c wheels up to a width of 28mm Weight: 548 g / 1.21 lbs (pair) Construction - Forged alloy RAINRUNNER Q/R mounts - 3M Reflex rear reflectivity - Virtually unbreakable Techniflex body - Stainless steel stays - Safety front stays - Mounting System - Below: Mount to Quick-Release skewers via included AXLE-RUNNERS - Above: Mount to brake bridge and fork crown via included nut and bolt or with zip ties Added Benefit - Included proprietary AXLE-RUNNERS mount to almost any front or rear Q/R skewer to “create” eyelets - 3M Reflex rear logo enhances visibility - Support stays spaced for maximum stiffness and frame compatibility - Front fenders equipped with safety stays to protect against objects becoming lodged in wheel - Sold pre-assembled for quick mounting

A sturdy, secure set of full-coverage fenders designed to fit more bikes than any fenders in their class. Easy to install and easy to adjust, Roadrunners are a favorite of both cyclists and shop mechanics. Weight: 606 g / 1.34 lbs (pair) Construction -Forged alloy RAINRUNNER Q/R mounts - 3M Reflex rear reflectivity - Virtually unbreakable Techniflex body - Stainless steel stays - Safety front stays Mounting System Below: Mount to Quick-Release skewers via included AXLE-RUNNERS Above: Mount to brake bridge and fork crown via included nut and bolt or with zip ties Added Benefit - Included proprietary AXLE-RUNNERS mount to almost any front or rear Q/R skewer to “create” eyelets - 3M Reflex rear logo enhances visibility - Support stays spaced for maximum stiffness and frame compatibility - Front fenders equipped with safety stays to protect against objects becoming lodged in wheel - Sold pre-assembled for quick mounting

- Made of highly resistant polypropylene - Rear: Mount fits seat posts Ø 25 – 32 mm; 47 to 60 mm blade width; Reflective strip; 125g - Front: Downtube installation w|elastomeric straps; 60 to 80 mm blade width; 62g - Wheel-Tire Size Compatibility: 24''-26"

- Made of resistant plastic - Fits all frames - Blade width: from 50 to 70mm

- Z+fal Croozer/Swan Road Fender Set Width 45mm For 700 Wheels

- Designed for 26'', 27.5'' & 29'' Mtn bikes - Easy to install and fit perfectly on your bike - Made of ultra-resistant techno polymer resin - Mounts onto 25 to 32 mm seat posts - Weight: 220 g

- Seatpost-mounted MTB mudguard - MD-TURN System: Quick screw-on mounting system, fits 25 to 32mm seatpost diameter - Double orientation for optimal tire coverage - Over-moulded flap offers the best protection and makes the mud guard more flexible - Reflective ring providing your bike with greater visibility - Material: Fibre-glass reinforced polypropylene - Wheel diameter: 27.5'' / 29'' - Max tire width recommended: 3.0" - Weight: 238 g

- Easy to install and remove - Light and discrete

- Fenders specifically developed for road bikes, the shield R35 will keep you protected on rainy days. - Sold by the set (includes front and rear fender), these fenders are easy to install and universal fit. - Adaptable – three different lengths of wings 20, 60, and 120mm for adaptable rear fender length. - MD-Fix mount – universal mount system for diameters 17 to 41mm (front fork) and 17 to 34mm (rear seat stays). - Universal fit – adapts to all types of frames, for 650c/700c/28” wheels. - Adjustable – optimal protection with adjustable position. - Blends in – mounted close to tires for a smooth integrated look.

- Light and discreet saddle mounted mudguard for bikes with up to 38mm tires - Double lock mounting system: easy on, easy off & stable - Only 55g

- Light and discreet saddle mounted mudguard for bikes with up to 2.8'' tires - Double lock mounting system: easy on, easy off & stable - Only 67g

- Design for road bikes - Installation and angle adjustment without tools - Made of ultra-resistant black polymer resin - Mounts onto the seat post - Blade width: 45 mm

The DRY-TECH fender set is an engineered fender set with extended, research-based length for superior water protection. The fenders are made of a lightweight, yet highly durable multi-material design. It's also been engineered in Specialized's very own Win Tunnel in order to improve protection and to minimize water spray. The fenders are available in three different sizes (35, 45, and 52mm), and they're designed to work on bikes with 700C wheels—with or without Specialized Plug + Play frame mounting. Lastly, for a finishing touch, the fenders include heat-treated, lightweight aluminum fender stays with stainless steel hardware. - Engineered fender set with extended, research-based length for superior water protection. - Lightweight, yet highly durable multi-material design. - Engineered in Specialized's Win Tunnel to improve protection and minimize water spra.y - Designed to work on bikes with 700C wheels and with or without Specialized Plug + Play frame mounting. - Heat-treated, lightweight aluminum fender stays with stainless steel hardware.

- Adapts to 24'' or 26'' wheels - Made of shock resistant polymer

- Can be used on 24'' or 26'' wheels - Designed specially for use with V-brakes and bike with suspension - Mounting kit included - Adjustable L shape steel bracket for rear and front mudguard - Made of shock resistant polymer - 100% recyclable material - Reflective safety stickers mounting

- Fits tubes from Ø27 to Ø35 - Fits V-Brakes and bikes with suspension - Adjustable L shape steel bracket for rear and front mudguard. - For an extra secure mounting of the rear mudguard we also offer a Ø 3 mm stainless steel U-stay - The rear mudguard offers the best protection by covering almost the entire wheel. - Material: polypropylene - 100% recyclable material - Reflective safety stickers - Mounting Kit Included

- A universal, quick-mount rear mudguard, that fits all seatpost diameters (25 to 32mm) - Quick and easy to install - Tool-free - Reflective safety stickers - Shock-resistant polymer - 100% recyclable material

- Fits tubes from Ø27 to 35mm - Fits 26" to 28" wheels - Two width options: 51mm and 46mm - Front mudguard compatible with disc brakes or V-Brake, and suspension or rigid bikes - Expander range on front and rear for perfect fitting - Adjustable L shape steel bracket for rear and front mudguard - For an extra secure mounting of the rear mudguard we also offer a Ø 3 mm stainless steel U-stay - Mounting kit included

- Fits tubes from Ø27 to 35mm - Fits 20" to 24" wheels - Mudguard section of 55mm - Front mudguard compatible with disc brakes or V-Brake, and suspension or rigid bikes - Expander range on front and rear for perfect fitting - Includes long and short clamp depending on the space needed to clip it to the frame - Adjustable L shape steel bracket for rear and front mudguard - Mounting kit included

- Adapts to 700C wheels - Made of shock resistant polymer

- Universal mounting on downtube - Easy assembly by rubber straps - Dual injection construction with polypropylene and rubber - Larger protection