A large nylon brush combined with natural cork
This fine horse-hair brush is perfect for brushing even the finest structures.
Structurite Roller red Medium structure Standard Medium snow temperature -4 °C — -12 °C 25 °F — 10 °F
T18 Digital Racing Iron 850 W This wax iron is especially suited for the handling of temperature-sensitive special and racing waxes. Application and properties The 15 mm thick base plate guarantees a constant temperature. The temperature of the wax iron is regulated and monitored by a microprocessor. Heating zone from 90–180 degrees. In the rear area, the plate of the T18 is bent to simplify the application of JetStream 2.0. The front plate is flat to apply the gliding waxes evenly. This wax iron is especially suited for the handling of temperature-sensitive special and racing waxes. Iron cover included.
Medium coarse bronze brush. Ø 0.18 mm. Preferred by some as first brush on wax. 10 strokes.
Great economy iron which is competitive with farmore expensive models. Redesigned from scratch with an ergonomic body and a wide metal plate that suits both alpine, snowboard and nordic. Angled at one side to make it easier to keep a constant speed when melting the wax. The thick metal plate ensures a stable heating. Plate dimension 100x160 mm.
Quality paper for all-round use. X-large roll, 200 m/650 feet.
Quality lintless paper for cleaning skis and all-round use. Large roll, 40 m/130 feet.
Fibertex Combi Pack with Fine (T266), Medium (T264) and Coarse (T266N) for ski base care.
Package including two klister brushes for even out klister on the ski base. Red brush for KX65 and KX75 klisters, and black brush for Universal, and KX20 to KX45 klisters. Gives the perfect end result.
Rectangular medium bronze brush. Good as a first brush used after scraping. 0.15mm bristle diameter.
Practical groove scraper for wax removal.
T823D PLEXI SCRAPER 3MM Sharp and effective plexi scraper for scraping off glider, 3 mm.
T824D PLEXI SCRAPER 4MM Sharp and effective plexi scraper for scraping off glider, 4 mm.
T825D PLEXI SCRAPER 5MM Sharp and effective plexi scraper for scraping off glider, 5 mm.
World Cup sharpening tool for plexi scrapers with 100 mm high quality file. Two walls for stable position makes it easy to sharpen precise.
Sharpener for plexi scrapers with short, sharp file, 40 mm. Can be mounted on the wall or waxing table. It's important to have sharp scrapers when prepping.
T0179B BRUSH RECTANGULAR, STEEL Steel brush. Ø 0.18 mm. Used as first brush on wax after scraping. 5-6 strokes. High quality steel brushe that has had an excellent reception in racing.
This is the second brush for use with hydrocarbon or fluorinated wax, or the first brush for use with Swix Cera F waxes: 10-20 strokes recommended for best results Rectangular Hand Brushes are great for travel and as an economical way to build a selection of ski tuning brushes
220 Volt, 550 Watt. A 12 mm plate gives optimal temperature stability. The iron is controlled by a micro processor and has digital temperature regulation. Temperature adjustment from 110°C to 170°C. On the back, the heating plate has an angle to facilitate application of Cera F. In front it is straight to control glide zone waxing and classical skis. Also available for 110 Volt (product # T72110).
T73D220 T73 DIGITAL IRON, 220V 220 Volt, 1000 Watt. A economy digital iron with an 18 mm thick plate for a great heat distribution, and with a digital microprocessor that ensures a very precise temperature control. The digital display is controlled by the adjustment wheel. Operating temperatures are 80°C to 170°C.
220 Volt, 500 Watt. The 8 mm thick plate gives a stable temperature. T73 has manual choice of temperature by indication of degrees and is simply done by an adjustmentwheel. Adjustment range from 100°C to 165°C.
Fine steel brush. Ø 0.06 mm. Ultra fine bristles. Goes deep into the base structure. Cleans and refreshes the base. Often used as second brush on wax. 4 to 5 strokes.
Gives protection for hands when working on skis.
The best ever of the STAR waxing irons for professional use. This appliance with a full 25 mm die cast aluminum plate and 850 watt power is managed with the fastest electronic processor and is ideal on any type of skis and for all ski waxes. This iron offers the maximum that you could desire: optimized plate for applying powder fluor wax, new bigger and high brightness display,”touch” buttons to easily set temperature, absolute thermal control, and perfect ergonomic balance. Temperature range 90 – 200 C. 110 Volt
The Rode Ski Wax 4mm Plexi Scraper is made for scraping all waxes for all skis. It is sharp and effective. A key tool in any Nordic wax tool kit.
Page 1 of 2 Next page