Wax Room Tools & Cleaners

A snow thermometer that measures a of range 97 °F to -33 °F. Precise measuring range for a snow temperature range of 32 °F to -4 °F. In practical pen format.

Toko Race Wax Remover is a gentle cleaning liquid for all types of bases. Removes wax residue especially of Top Finish products and prepares the base for waxing.

This is an ergonomically shaped surface structuring device with interchangeable structure roller for easy structuring of the running surface of cross country skis. Structuring significantly improves the sliding properties of skis. As a kit, the device is supplied with all three rollers (yellow/red/blue) and ensures optimally structured skis in all snow conditions and temperatures.

Structurite Roller red Medium structure Standard Medium snow temperature -4 °C — -12 °C 25 °F — 10 °F

Aerosol spray-on base cleaner. Lightly scented. The active ingredient is a low aromatic hydrocarbon with good solvent capacity. Non-ozone depleting aerosol. Spray on the base, remove as much wax or klister as possible with a scraper, and wipe off with Fiberlene paper. 5.1 fl. oz.

I61C BASE CLEANER AEROSOL 70 ML Aerosol spray on base cleaner. Lightly scented. The active ingredient is a low aromatic hydrocarbon with good solvent capacity. Non-ozone depleting aerosol. Spray on the base, remove as much wax or klister as possible with a scraper, and wipe off with Fiberlene paper. 2.4 fl. oz.

Used for klister application or to remove wax or klister from the base before cleaning with Base Cleaner.

Medium coarse bronze brush. Ø 0.18 mm. Preferred by some as first brush on wax. 10 strokes.

Great economy iron which is competitive with farmore expensive models. Redesigned from scratch with an ergonomic body and a wide metal plate that suits both alpine, snowboard and nordic. Angled at one side to make it easier to keep a constant speed when melting the wax. The thick metal plate ensures a stable heating. Plate dimension 100x160 mm.

Quality lintless paper for cleaning skis and all-round use. Large roll, 40 m/130 feet.

Fibertex Combi Pack with Fine (T266), Medium (T264) and Coarse (T266N) for ski base care.

Blue nylon brush. Ø 0.12 mm. A fine soft nylon brush for polishing all waxes. 5 to 10 strokes.

A non-toxic 100% natural product used for cleaning wax off hands, even with klister and sticky hard waxes.

Rectangular medium bronze brush. Good as a first brush used after scraping. 0.15mm bristle diameter.

High quality natural cork. Has felt side for application of Cera F.

Sharpener for plexi scrapers with short, sharp file, 40 mm. Can be mounted on the wall or waxing table. It's important to have sharp scrapers when prepping.

T0179B BRUSH RECTANGULAR, STEEL Steel brush. Ø 0.18 mm. Used as first brush on wax after scraping. 5-6 strokes. High quality steel brushe that has had an excellent reception in racing.

This is the second brush for use with hydrocarbon or fluorinated wax, or the first brush for use with Swix Cera F waxes: 10-20 strokes recommended for best results Rectangular Hand Brushes are great for travel and as an economical way to build a selection of ski tuning brushes

Synthetic cork for kick wax.

T73D220 T73 DIGITAL IRON, 220V 220 Volt, 1000 Watt. A economy digital iron with an 18 mm thick plate for a great heat distribution, and with a digital microprocessor that ensures a very precise temperature control. The digital display is controlled by the adjustment wheel. Operating temperatures are 80°C to 170°C.

220 Volt, 500 Watt. The 8 mm thick plate gives a stable temperature. T73 has manual choice of temperature by indication of degrees and is simply done by an adjustmentwheel. Adjustment range from 100°C to 165°C.

Fine steel brush. Ø 0.06 mm. Ultra fine bristles. Goes deep into the base structure. Cleans and refreshes the base. Often used as second brush on wax. 4 to 5 strokes.

Special cream for cleaning your hands after waxing with sticky hardwaxes or klister.

A citurus-based cleaner for ski bases that is 100% biodegradable.

Quality paper for all-round use. X-large roll, 200 m/650 feet.

Lightly scented liquid base cleaner. Remove as much wax or klister as possible with a scraper before the base is cleaned and wiped off with Fiberlene paper. The active ingredient is a low aromatic hydrocarbon with good solvent capacity. 16.9 fl. oz.

Practical groove scraper for wax removal.

World Cup sharpening tool for plexi scrapers with 100 mm high quality file. Two walls for stable position makes it easy to sharpen precise.

Structure kit with three V-rollers: 0.5 mm for cold snow (standard), 0.75 mm straight for 0°C to -5°C, 1.00 mm for wet snow.