Tubes

- High-quality, ultra-low weight tube that retains air just as well as conventional butyl tubes - Possesses the same resistance to punctures - 40mm valve length

- High-quality, ultra-low weight tubes that retain air just as well as conventional butyl tubes - Possesses the same resistance to punctures

- High-quality, ultra-low weight tubes that retain air just as well as conventional butyl tubes - Possesses the same resistance to punctures

- Polyurethane tube - Twice as strong as a regular butyl tube - Super lightweight - Very compact

- Polyurethane tube - Twice as strong as a regular butyl tube - Super lightweight - Very compact

- Polyurethane tube - Twice as strong as a regular butyl tube - Super lightweight - Very compact

- Polyurethane tube - Twice as strong as a regular butyl tube - Super lightweight - Very compact - Wheel Diameter: 29'' - Tube Width: 2.20-2.60 - Valve Length: 40mm - Valve: Presta - Tube Weight: 100g - Shaft Type: Threaded - Thorn resistant: No

- Standard 1mm tube thickness - Removable-core Presta valve

- Designed to improve rotational stability by decreasing rotational mass at the valve body - Lightweight aluminum Presta-valve body - Removable valve core - Extenders are available and sold separately

Our Standard Presta Valve Tubes feature a molded method of construction that ensures a consistent thickness of butyl rubber. This means that they don't have any unnecessary weight and will roll smooth, ride after ride.

Challenge's S.C. Seamless Latex Cross Tube is hand made for the highest quality. Latex tubes are usually lighter and roll with less resistance than standard butyl tubes. They also resist punctures. The S.C. fits tires 28 to 35mm wide, and has a 47.5mm-long valve with a removable core. - 72 grams

When you take a traditional sized inner tube and put it in a larger tire, the rubber is forced to stretch beyond what it was originally designed for, making it thinner and more susceptible to punctures, pinches, and flats. Our Tubes are adequately sized to fit anything from 2.10" all the way to 2.40" and beyond. The next area where we thought we could really improve on is the valve. No matter how long you’ve been riding, you will have some point blown a tube at the valve through either installation or damaging it on the sharp valve hole in the rim. We decided to use our own full-length steel valve over the standard rubber valve that most innertubes use today. This steel valve is much stronger and more resilient to damage, and the threaded lockring included allows you to install and inflate the inner tube with way more ease and ensures that the valve is always fully seated and installed correctly. Oh yeah, did we add that we had a lot of fun with the packaging? I’m sure all the guitarists out there will get the name and be stoked to see these stacked up in their local shop.

- New technology ultra resistant to punctures and nipping impact - Piercing or nipping holes will close naturally thanks to its design that creates a compression reaction - Inflate half as often as classic Michelin tubes

- New technology ultra resistant to punctures and nipping impact - Piercing or nipping holes will close naturally thanks to its design that creates a compression reaction - Inflate half as often as classic Michelin tubes

The least expensive way to ditch 40+ grams of rotating weight is with our Turbo Talc Tubes. A patented, oversized 4.8cm valve base prevents tearing, while a partially threaded valve stem provides a clean interface with pumps. Our lightest and most supple tube offering, it's also been proven in rolling-resistance testing to reduce drag by as much as 13% per wheel. - Packed in talc for easier installation. - 4.8cm valve base prevents issues of valves tearing off. - Smooth at the top for easier pump head insertion and reduced wear on pump internals. - Thinner tube design saves approximately 40 grams of rotating weight. - Thickness: 0.6mm

We all love to stop and smell the roses, but like they say, every rose has its thorn. And as we all know, there's no better way to ruin a beautiful ride than with a thorn in the tube. No need to worry, though, because we designed our Thorn-Resistant Presta Valve Tubes to combat pesky pricks of all shapes and sizes. Starting at the basis of the construction, we designed the tube to be thicker at the outer side (the part against the tire) in order to stop pesky bits from puncturing all the way through the tube. Then, at the inner side (the part against the rim), it's actually thinner in order to reduce weight. This way, you don't have to sacrifice performance in the name of protection. - Thicker construction on the outer side (against the tire) enhances puncture protection. - Thinner construction on the inner side (against the rim) maximizes weight savings.

- 1.5mm wall thickness - 26'' available in Presta and Schrader valves - Compliant with California Proposition 65

- 0.9mm wall thickness - Removable valve core - 700c x 18 – 25 = 27 x 1 - 700c x 28 – 35 = 27 x 1-1/8, 1-1/4

- Standard 1mm tube thickness - Presta valve

Weight and size optimized for competitive use.

Made from top quality butyl, more airtight and sturdy.

Made from top quality butyl, more airtight and sturdy.

Schwalbe tubes retain air pressure considerably longer than standard tubes. The quality and purity of the rubber mixture directly affects the quality of the tube. - 40mm valve length

The least expensive way to ditch 40+ grams of rotating weight is with our Turbo Talc Tubes. A patented, oversized 4.8cm valve base prevents tearing, while a partially threaded valve stem provides a clean interface with pumps. Our lightest and most supple tube offering, it's also been proven in rolling-resistance testing to reduce drag by as much as 13% per wheel. - Packed in talc for easier installation. - 4.8cm valve base prevents issues of valves tearing off. - Smooth at the top for easier pump head insertion and reduced wear on pump internals. - Thinner tube design saves approximately 40 grams of rotating weight. - Thickness: 0.6mm

- High quality fat bike inner tube - Standard wall construction

- 1.2 mm thick walls - Freeride specific - Presta valve

- 0.8mm walls (0.9mm walls for 16", 20", 24" sizes) - Puncture resistant

- 0.8mm walls (0.9mm walls for 16", 20", 24" sizes) - Puncture resistant

- 0.8mm walls (0.9mm walls for 16", 20", 24" sizes) - Puncture resistant - Tube Width: 1.50-2.50 - Valve Length: 48mm - Valve: Presta - Tube Thickness in mm: 0.8mm - Valve Core: Removable

- 0.8mm walls (0.9mm walls for 16", 20", 24" sizes) - Puncture resistant - Tube Width: 1.50-2.50 - Valve Length: 48mm - Valve: Schrader - Tube Thickness in mm: 0.8mm - Valve Core: Removable